Pulse™ is an open cabinet revolving speaker emulator pedal - based on Pink Floyd’s David Gilmour sound using rotary speakers Doppola and Gibson’s® Maestro Rover RO-1.

Pulse uses stereo outputs to create the same effect as if you have a full size revolving vintage speaker cabinet.

It is modeled upon classics to become a classic.

FEATURES:
Slow Speed/Fast Speed
Controls the speed of the speaker rotation when the unit is in SLOW pr FAST mode.

Distance
Sets the distance between virtual microphones and the revolving speaker cabinet.

Inertia
Controls the amount of time it takes for the speaker to accelerate from SLOW to FAST or FAST to SLOW mode.

Mix
Controls the amount of dry input signal from the FET preamp in the output mixer. Minimum setting is 100% dry, maximum setting is 100% wet. 12:00 position yields 50% - 50% wet-dry mix.

True Bypass switching system with status LED
Switches the effect ON and OFF. When in ON mode, status LED will glow yellow.

Fast/Slow switching system with status LEDs
Switches between SLOW and FAST speaker rotation. Yellow LED indicates SLOW mode and blue LED indicates FAST mode.

Output R MONO/Output L
PULSE provides a stereo output by two virtual microphones placed on each side of the speaker cabinet. Using solely OUT R - MONO output engages a single virtual microphone in front of the speaker cabinet.

External Input
Accepts expression pedal or remote switch connection for external speed control. Onboard SLOW/FAST switch is automatically disengaged when expression pedal or remote switch is connected. For expression pedal we suggest using Roland® EV-5 but it will operate with almost any type of pedal available.

Volume R/Volume L
Control the levels of the output signals on OUT R and OUT L channels. Unity gain is at 12:00 position.

TECHNICAL SPECIFICATIONS:

Power Input Voltage: 9V DC
Power input connector: 5.5mm / 2.1mm barrel connector (Center Negative)
Power Consumption: ~ 70mA
Size: 4.4” x 2.3”